PLUME Signature in Wallets
Video
Original
Abstract
ZKSNARKs have enabled ideation for new identity applications based on anonymous proofofownership. One of the primary technologies that would enable the jump from existing apps to systems that require anonymous uniqueness is the development of verifiably deterministic signatures. Because Ethereum is based on ECDSA, there is no way right now for someone to verify that a signature is generated deterministically, even with ‘deterministic’ ECDSA signatures: a ZKSNARK proof would need someone’s private key to do so, and some hardware wallets do not even allow viewing of a private key. Broadly, we don’t want to export/copypaste the private key into a SNARK to be an intended user behavior, and most hardware wallets will not be able to run SNARK arithmetization inside a secure enclave for existing schemes (and nor do we want to standardize an entire proof system inside a wallet right now when they emerge and evolve almost every year). Thus we are left to select a new algorithm that offers us verifiable, deterministic nullifiers that can be SNARKed outside the enclave.
One specific example of how such a signature can lead to unique pseudonymity is that we prove it was generated correctly in a ZKSNARK that only reveals publicly the hash(signature), and the SNARK additionally proves some property the public key has (i.e. is in some anonymity set, has executed some set of actions on chain, etc). This proof is the only thing that is ever seen by other people, and so the hash(signature) can be used as a “nullifier”: a public commitment to a specific anonymous account, to forbid actions like double spending, or allow a consistent identity between anonymous actions. We aim to standardize a new verifiably deterministic signature algorithm that both uniquely identifies the keypair, and keeps the account identity secret, where verification does not require a secret key. The specific signature function we found (and will discuss for the rest of the post) is $hash(message, public\ key) ^ {secret\ key}$.
Motivation
 Existing ZK applications have the advantage that there is no uniqueness constraint on the provers: that is, allowing the same wallet to prove itself as a member more than once is intended. However, many applications require a maximum of one action per user, especially protocols that desire Sybil resistance. Such protocols are not natively possible on Ethereum right now without mapping each address into an optin mapping that also maps a user’s private key to a new system, which adds complexity, loses atomicity, and does not benefit from the rich onchain history of Ethereum accounts.
 Specific applications that require this tech include:
 zk voting, where each account in some set has one vote
 pseudonymously claiming an airdrop like Stealthdrop
 moderating a pseudonymous forum, where people can prove that they are the same identity elsewhere in the forum
 zk proof of solvency — if you want two exchanges to prove they know a set of private keys that hold some balance, you need a way to ensure that two exchanges aren’t both claiming the same address, while keeping it private
As such, a deterministic value based on the Ethereum account’s ECDSA keypair is a necessary component of ensuring one action per user and enables all these applications on Ethereum.
Specification
We propose a new signature standard that offers the following properties, to be implemented for standard ECDSA keys within wallets:
 It produces signatures that contain a deterministic component and a nondeterministic component. The deterministic component may be used as a nullifier.
 Signers can use existing secpk256k1 keypairs, such as those in hardware wallets that support Ethereum accounts. As a consequence, secret keys can remain in secure enclaves if there is a generator point multiplication API into the enclave (which Ledger for instance has).
Parameters
This scheme uses the secp256k1 curve, defined in Standards for Efficient Cryptography 2 (SEC 2) v2, page 9.
We use the following notation to refer to the parameters of this curve:
 $g$: the base point (also called the generator) of the curve.
 $p$: the order of the curve.
 $F_p$: the finite field whose order is $p$.
Note we use exponential notation to denote elliptic curve scalar multiplications.
Public key encoding functions
SEC1
This scheme uses the SEC1 elliptic curve point encoding scheme defined in Standards for Efficient Cryptography 1 (SEC 1) v2. Point compression is used. We use the notation $\mathsf{sec1}(pk)$ to denote the compressed encoding of secp256k1 curve point $pk$ as a bytestring of length 33.
Hash functions
SHA256
This scheme uses the SHA256 hash function defined in IETF RFC 4634.
In this document, we use the notation $\mathsf{sha256}(a_1,.. a_n)$ to denote the sha256 digest of the concatenation of $n$ values $a_1, ..., a_n$. The digest should then be interpreted as a bigendian value in the secp256k1 scalar field.
Hashtocurve
We use the notation $\mathsf{htc}([a_1, ..., a_n])$ to denote the elliptic curve point which is the result of the IETF RFC 9380 secp256k1_XMD:SHA256_SSWU_RO_
in Appendix J.8.1. This hashtocurve algorithm operates over the concatenation of $n$ values $a_1, ..., a_n$.
Key generation
A keypair comprises of $(sk, pk)$, defined as such:
 $sk$: The user's secret key, which is a cryptographically secure random scalar in the field $F_p$.
 $pk$: The user's public key, defined as $g^{sk}$, which is a point on the secp256k1 curve.
Signature generation
This scheme builds upon the ChaumPedersen signature scheme ^{1}. Given a 32byte message $m$ and a keypair $(sk, pk)$, a user may generate a signature as such:
 Pick a random $r$ from $F_p$.
 Compute $h = \mathsf{htc}([m, \mathsf{sec1}(pk)])$.
 Compute $z = h ^ r$.
 Compute the nullifier $\mathsf{nul} = h^{sk}$.
 Compute $c = \mathsf{sha256}([g, pk, h, \mathsf{nul}, g^r, z]])$.
 Compute $s = r + sk \cdot c$.
The signature is $(z, s, g^r, c, \mathsf{nul})$.
The length of the input to $\mathsf{htc}$ is always 65 bytes.
Note that in this scheme, we compute $h$ as the hash of the message and $pk$, not the message and $r$. This is to make our scheme deterministic.
Signature verification (nonZK)
📝 Note: This section is nonnormative.
NonZK signature verification is not part of this proposal but relevant for an intuitive understanding of the ZK signature verification.
In a situation where the verifier knows $g$, $m$, the signer's public key $pk$, and the signature $(z, s, g^r, c, \mathsf{nul})$, they may perform the following checks to determine if the signature is valid:
 Compute $h = \mathsf{htc}([m, \mathsf{sec1}(pk)])$.
 Compute $c' = \mathsf{sha256}([g, pk, h, \mathsf{nul}, g^r, z])$.
 Reject if any of the following is false: a. $g^{s} \cdot pk^{c} \stackrel{?}{=} g^r$ b. $h^s \cdot \mathsf{nul}^{c} \stackrel{?}{=} z$ c. $c \stackrel{?}{=} c'$
 Accept if all of the above is true.
Now we move onto the ZK signature verification specs.
Version 1: Verifier Optimized
In a situation where there is a verifier who must not know the signer's $pk$, but the signer must nevertheless prove that they know $sk$ corresponding to the signature given $m$, a zeroknowledge proof is required.
The following verification function may be described via a circuit as part of a noninteractive zeroknowledge proving system, such as Groth16. To create a proof, the prover supplies the following inputs:
Public: $\mathsf{nul}$, $c$ Private: $pk$, $r$, $s$, $z$, $g^r$, $hash[m, g^sk]$ (included to save constraints)
The circuit performs the following computations:
 Compute $h = \mathsf{htc}([m, \mathsf{sec1}(pk)])$.
 Compute $pk = g^{sk}$.
 Compute $c' = \mathsf{sha256}([g, pk, h, \mathsf{nul}, g^r, z]])$.
 Compute $g^{s} \cdot pk^{c}$.
 Compute $g^r$.
 Compute $h^s \cdot \mathsf{nul}^{c}$.
It also establishes the following constraints:
 $g^{s} \cdot pk^{c} = g^r$
 $h^s \cdot \mathsf{nul}^{c} = z$
 $c = c'$
Version 2: Prover Optimized
Currently, SHA256 hashing operations are particularly expensive with zk proofs in the browser. In the context of PLUME, the computation of $c$ is a bottleneck for efficient proof times, so one modification suggested by the Poseidon team was to move this hash computation outside the circuit, into the verifier.
To do this, we make $z$ and $g^r$ public signals in the circuit and update the definition of $c$ to $c = \text{sha256}([\text{nul}, g^r, z])$. The updated protocol is as follows.
Public: $\mathsf{nul}$, $c$, $g^r$, $z$ Private: $pk$, $r$, $s$, $hash[m, g^sk]$
The circuit performs the following computations:
 Compute $h = \mathsf{htc}([m, \mathsf{sec1}(pk)])$.
 Compute $pk = g^{sk}$.
 Compute $g^{s} \cdot pk^{c}$.
 Compute $g^r$.
 Compute $h^s \cdot \mathsf{nul}^{c}$.
The circuit establishes the following constraints:
 $g^{s} \cdot pk^{c} = g^r$
 $h^s \cdot \mathsf{nul}^{c} = z$
In addition to verifying the zkSNARK, the PLUME verifier performs the following check.
$c == \text{hash}(\text{nul}, g^r, h^r)$
Due to SHA256 being a native precompile on Ethereum, this operation will still be efficient for smart contract verifiers.
Version 3:
There may be a more efficient V3 in the future, perhaps via removing indifferentiability from hash_to_curve.
Rationale
We will define a few specific properties we are looking for in a candidate algorithm, then define a few other intuitive algorithms and explain why they don’t actually work.
 Noninteractivity
 The importance of noninteractivity in ZK ID systems is that it enables a large anonymity set from the start, making it resistant to sybil attacks and spam, which would be possible if there was an interactive phase. This allows for new use cases such as ZK airdrops.
 Noninteractivity enables the full set of eligible users to be part of the anonymity set, without requiring any interaction. This is possible if the zk proof can verify the set membership in the Merkle tree, the message via the signature, and the unique nullifier. Interactive nullifiers, such as tornado.cash's, require updating the anonymity set Merkle tree with each new user,
 Uniqueness
 If we want to forbid actions like double spending or double claiming, we need them to be verifiably unique per account.
 For example: Because ECDSA signatures are nondeterministic, signatures don’t suffice; we need a new deterministic function, verifiable with only the public key. We want the nullifier to be noninteractive, to uniquely identify the keypair yet keep the account identity secret.
 The key insight is that such nullifiers can be used as a public commitment to a specific anonymous account to provide us with a uniqueness guarantee.
 Deterministic
 We want each account to only generate one such signature, and generate it exactly the same over time into the future.
 Verifiable without a secret key
 In cases where signatures are nondeterministic (like ECDSA) the signature alone is not sufficient for verification.
 We want a new, deterministic function verifiable only with the public key
 We don’t want users copypasting secret keys anywhere, and we need to choose a function such that the enclave calculation is simple enough for hardware wallets.
 Because the nullifier is noninteractive, we are able to uniquely identify the key pair without revealing the account identity.
We based the final design to be as simple as possible, and based off of BLS signatures, ChaumPederson EQDL, and GohJarecki’s EDL paper, but to work on secp256k1.
Security Considerations
There are formal proofs of this specific algorithm’s cryptography in the PLUME paper ^{2}. The theory has been published, and implementations have had one internal round of audit, but they have not endtoend been formally verified or audited yet, although empirically they correctly conform to the spec laid out.
The InteractivityQuantum Secrecy Tradeoff
Note that in the far future, once quantum computers can break ECDSA keypair security, most Ethereum keypairs will be broken, but migration to a quantumresistant keypair in advance will keep active funds safe. Specifically, people can merely sign messages committing to new quantumresistant keypairs (or just higherbit keypairs on similar algorithms), and the canonical chain can fork to make such keypairs valid. ZKSNARKs become forgeable, but there is still forwardsecrecy for zk proofs. In the best case, the chain should be able to continue without a hitch.
However, if people rely on any type of deterministic nullifier like our construction, their anonymity is immediately broken: someone can merely derive the secret keys for the whole anonymity set, calculate all the nullifiers, and see which ones match. This problem will exist for any deterministic nullifier algorithm on ECDSA, since revealing the secret key reveals the only source of “randomness” that guarantees anonymity in a deterministic protocol.
If people want to keep postquantum secrecy of data, they have to give up at least one of our properties: the easiest one is probably noninteractivity. For example, for the zeroknowledge airdrop, each account in the anonymity set publicly signs a commitment to a new semaphore id commitment (effectively address pk publishes $hash[randomness\ \ external\ nullifier\ \ pk]$). Then to claim, they reveal their external nullifier and ZK prove it came from one of the semaphore ids in the anonymity set. This considerably shrinks the anonymity set to everyone who has opted in to a semaphore commitment prior to that account claiming. As a result, there probably needs to be a separate signup phase where people commit to nullifiers in order to seed the anonymity set. This interactivity requirement makes applications such as the zk airdrop or nicer tornado cash construction (in the use cases section) much harder. However, since hashes (as far as we currently know) are still hard with quantum computers, it’s unlikely that people will be able to ever deanonymize you.
A recent approximation of $2n^2$ qubits needed to solve discrete log via quantum annealing that failed to work on larger than $n$ = 6bit primes shows that we are likely several decades from this becoming a reality, and the $n^2$ qubits needed to solve RSA having predictions 1040 years out suggest that it will likely take longer than that to solve discrete log.
We hope that people will choose the appropriate algorithm for their chosen point on the interactivityquantum secrecy tradeoff for their application, and hope that including this information helps folks make the right choice for themselves. Folks prioritizing shorterterm secrecy, like DAO voting or confessions of the young who will likely no longer care when they’re old, might prioritize this document’s nullifier construction, but whistleblowers or journalists might want to consider the semaphore construction instead.
Copyright
Copyright and related rights waived via CC0.
Footnotes

↩{ "DOI": "10.1007/3540480714_7", "URL": "https://link.springer.com/content/pdf/10.1007/3540480714_7.pdf", "publisherplace": "Berlin, Heidelberg", "author": [ { "given": "David", "family": "Chaum" }, { "given": "Torben Pryds", "family": "Pedersen" } ], "containertitle": "Advances in Cryptology — CRYPTO' 92", "editor": [ { "given": "Ernest F.", "family": "Brickell" } ], "type": "paperconference", "id": "10.1007/3540480714_7", "citationlabel": "10.1007/3540480714_7", "ISBN": "9783540480716", "issued": { "dateparts": [ [ 1993 ] ] }, "page": "89105", "publisher": "Springer Berlin Heidelberg", "title": "Wallet Databases with Observers" }

↩{ "DOI": "1721.1/147434", "author": [ { "given": "Aayush", "family": "Gupta" }, { "given": "Kobi", "family": "Gurkan" } ], "type": "book", "id": "Gupta_Gurkan_2022_PLUME", "citationlabel": "Gupta_Gurkan_2022_PLUME", "issued": { "dateparts": [ [ 2022, 9 ] ] }, "keyword": "zero knowledge,zk proof,nullifier,ddhvrf,vrf,pseudonymity,ethereum,bitcoin,ecdsa,secp256k1,plume,signature", "note": "Cryptology ePrint Archive, Paper 2022/1255", "title": "PLUME: An ECDSA Nullifier Scheme for Unique Pseudonymity within Zero Knowledge Proofs", "URL": "https://eprint.iacr.org/2022/1255" }
Adopted by projects
Not miss a beat of EIPs' update?
Subscribe EIPs Fun to receive the latest updates of EIPs Good for Buidlers to follow up.
View all